OD: 44mm, Thickness: 1.5mm-
–
Fits Dolmar/Makita models 111, 115, 125-
Fits Husqvarna models 50, 152, 250, 350, 351, 2149, 246-
Fits Efco models 8510, 8515, 146-
Fits Jonsered models 2050,-
Part No. 85-61930
OEM Part No:
View cart “STEEL FLAT IDLER PULLEY” has been added to your cart.
Roll over image to zoom in
Brand | Efco, Makita, Husqvarna, Dolmar, Jonsered |
---|
SKU: 85-61930
Category: » Internal Engine
Tags: 028, 031, 041, 115, 125 Fits Efco models 8510, 146 Fits Husqvarna models 50, 152, 2149, 246 Fits Jonsered models 2050, 250, 350, 351, 750, 8515, 945, 946 Fits Partner models 55, Fits Dolmar/Makita models 111, Fits Oleo Mac models 450, Fits Solo models 153, Fits Stihl models 026, MS260, MS280, MS281, MS310, MS311, MS410
$35.98 inc GST
Height | Inside Diameter | Outside Diameter |
---|---|---|
1 3⁄16” (30mm) | 11⁄16” 17mm | 3 5⁄8” 92mm |
Height | Inside Diameter | Outside Diameter |
---|---|---|
1 3⁄16" (30mm) | 11⁄16" 17mm | 3 5⁄8" 92mm |
$101.51 inc GST
Body Length | Centre to Centre | Outside Diameter | Shaft Length |
---|---|---|---|
94mm | 107mm | 127mm | 180mm |
Body Length | Centre to Centre | Outside Diameter | Shaft Length |
---|---|---|---|
94mm | 107mm | 127mm | 180mm |
Length | Outside Diameter |
---|---|
51mm | 5mm |
$9.08 inc GST
Height | Inside Diameter | Outside Diameter |
---|---|---|
22mm | 16mm | Flange: 25.4mm OD: 23mm |
Height | Inside Diameter | Outside Diameter |
---|---|---|
22mm | 16mm | Flange: 25.4mm OD: 23mm |
$70.43 inc GST
Gauge | Length | Pitch |
---|---|---|
.043″ | 10″ (254mm) | 3⁄8LP |
Gauge | Length | Pitch |
---|---|---|
.043" | 10" (254mm) | 3⁄8LP |
Length | Width |
---|---|
103 3⁄4" | 17⁄32" |
Length | Width |
---|---|
88 5⁄8" | 17⁄32" |
$37.03 inc GST
Height | Inside Diameter | Outside Diameter |
---|---|---|
1 1⁄2” (38mm) | 11⁄16” (17.5mm) | 5 5⁄32” (131mm) |
Height | Inside Diameter | Outside Diameter |
---|---|---|
1 1⁄2" (38mm) | 11⁄16" (17.5mm) | 5 5⁄32" (131mm) |
Inside Diameter | Width |
---|---|
1 1⁄2" (38mm) | 1 3⁄8" (35mm) |