 |
–
Fits Honda Single Cylinder models 25/30 micron.-
Fits Kubota models F22100, F22400. 25/30 micron.-
–
Fits John Deere models 425, 455, X495, X595, X740, X744, X748, X749, X750, X754, X758, Gator-
–
Part No. 20-1704
OEM Part No: 15400-679-023, 15410-MJ0-004, 3040137580, 5038781, 15400-PLM-A01PE, 15400-PR3-004, 15400-P0H-305, 15410-ZJ4-999AH, 15410-MJ0-405, AM101378, M806418, 30401-37580, HH150-32094, 785634, 129150-35150
| Brand | John Deere, Honda, Kubota |
|---|
| Height | Inside Diameter | Outside Diameter |
|---|---|---|
| 25⁄32” (20mm) | 11⁄16” (17mm) | 4″ (102mm) |
| Height | Inside Diameter | Outside Diameter |
|---|---|---|
| 25⁄32" (20mm) | 11⁄16" (17mm) | 4" (102mm) |
| Centre Hole Diameter | Length | Thickness | Width |
|---|---|---|---|
| 20.6mm | 21 5⁄8” (549mm) | 6.4mm | 76mm |
| Centre Hole Diameter | Length | Thickness | Width |
|---|---|---|---|
| 20.6mm | 21 5⁄8" (549mm) | 6.4mm | 76mm |
| Centre Hole Diameter | Length | Thickness | Width |
|---|---|---|---|
| 21mm | 17″ 432mm | 5.2mm | 64mm |
| Centre Hole Diameter | Length | Thickness | Width |
|---|---|---|---|
| 21mm | 17" 432mm | 5.2mm | 64mm |
| Inside Diameter | Outside Diameter |
|---|---|
| Thread: 8mm x 1.25 | Hex: 13mm (deep nut) |
| Inside Diameter | Outside Diameter |
|---|---|
| Thread: 8mm x 1.25 | Hex: 13mm (deep nut) |
| Drive Links | Gauge | Length | Pitch |
|---|---|---|---|
| 1⁄4“= 68, 3⁄8LP= 45 | .050″ | 12″ (305mm) | 1⁄4” & 3⁄8LP |
| Drive Links | Gauge | Length | Pitch |
|---|---|---|---|
| 1⁄4"= 68, 3⁄8LP= 45 | .050" | 12" (305mm) | 1⁄4" & 3⁄8LP |
| Drive Links | Gauge | Length | Pitch |
|---|---|---|---|
| 1⁄4“= 60, 3⁄8LP= 42 | .050″ | 10″ (254mm) | 1⁄4” & 3⁄8LP |
| Drive Links | Gauge | Length | Pitch |
|---|---|---|---|
| 1⁄4"= 60, 3⁄8LP= 42 | .050" | 10" (254mm) | 1⁄4" & 3⁄8LP |
| Height | Inside Diameter | Outside Diameter |
|---|---|---|
| 1 1⁄32” (26mm) | 11⁄16” (17mm) | 5 7⁄16” (138mm) |
| Height | Inside Diameter | Outside Diameter |
|---|---|---|
| 1 1⁄32" (26mm) | 11⁄16" (17mm) | 5 7⁄16" (138mm) |
| Drive Links | Gauge | Length | Pitch |
|---|---|---|---|
| 1⁄4“= 76, 3⁄8LP= 53 | .050″ | 14″ (355mm) | 1⁄4” & 3⁄8LP |
| Drive Links | Gauge | Length | Pitch |
|---|---|---|---|
| 1⁄4"= 76, 3⁄8LP= 53 | .050" | 14" (355mm) | 1⁄4" & 3⁄8LP |
| Centre Hole Diameter | Length | Thickness | Width |
|---|---|---|---|
| 21mm | 19″ 483mm | 5.2mm | 70mm |
| Centre Hole Diameter | Length | Thickness | Width |
|---|---|---|---|
| 21mm | 19" 483mm | 5.2mm | 70mm |
